» Vertical Autoclave
VERTICAL AUTOCLAVE (Fully AUTOMATIC) (PLT-101A)
APPLICATIONS of Fully automatic Vertical Autoclave
- Autoclave Vertical are most ideal for critical applications requiring
assured and reliable total destruction of all living micro- organisms
- Vertical autoclave is low cost options for general sterilization
ideal tool for Laboratories, Hospitals, Nursing Homes, R&D labs etc,
Pharmaceutical, Food &Beverage Industries and Institutions
SALIENT FEATURES & CONSTRUCTION of Fully automatic Vertical Autoclave
- Inner & Outer Chamber, constructed from S. S. 304 Grade
- Bucket / Basket Made of Stainless Steel
- Water Level Indicator
- Lid Closing by Radial Locking System
- Sealing of Lid by Neoprene Rubber Gasket
- Lid is fitted with Pressure Gauge, Spring Loaded Safety Valve.
- Operating range from 15psi to 20psi pressure
- Sterilizing Temperature up to 1340C
- Tested up to 2.5 times of required Pressure
- Fully automatic models requiring no human intervention till a full
sterilization cycle is over.
- Fitted with a (Programmable Logic Controller) LCD Display with
respect to time and temperature.
- Enabling user automatic purging of stale air.
- Sterilizing hold time system for sterilizing period and cycle end.
- Automatic exhaust of pressure.
- Audio alarm/ buzzer is raised at the end of the cycle on.
- Voltage: 220 Volts AC (50 Hz)
TECHNICAL SPECIFICATIONS & ORDERING INFORMATIONS of Fully automatic Vertical Autoclave
||MODEL ACA - 1
||MODEL ACA - 2
||MODEL ACA - 3
||MODEL ACA - 4
||MODEL ACA - 5
|Inner Dimensions (Dia x Height)
||10 x 18
||12 x 20
||14 x 22
||18 x 24
||22 x 30
||Made of Neoprene Rubber
||1.2 kgf / cm (15psi)at 121°c
||0-2.1 kgf / cm² (30 psi)
||From 15 to 20psi (Adjustable)
|Inner Pressure Tank
||Stainless Steel (SS-304)
||Mild Steel Plate lined with
Stainless Steel from inside
||Made of Stainless Steel
||Radial Locking system worked by
||Paddle lifting device
|Water Level Indicator
||Fitted on the outer chamber
|Boiler Hydraulically Tested
||Upto +40 psi
||+ 3 psi
|Controller (PLC Based)
||µProcessor Based Fully
Automatic Fuzzy Logic Control System.
||16x4 line Alphanumeric Digital LCD
with backlet display with Set value (SV) and Process Value (PV)
|Timer (Auto Time Control) & Buzzer
||Fitted with AUTOMATIC DIGITAL MINUTE
TIMER which starts automatically when set/desired value of
temperature is achieved. When the set time period is over the
heaters get switched off automatically with alarm for cycle end.
||Spring Loaded Type
|Water Draining System
||Hand Operated Valve
||BY ISI Marked Immersion Heaters
|Steam & Vacuum Release
|Digital Pressure Controller
||With electronic transducer and
|PLC Based Control System
||Touch Screen (HMI) with respect to
time and temperature programmable by user.
||with inbuilt data recording in pen
drive. Facility also available
||220/230V AC, 50/60Hz
All the instruments can be designed with PLC
Based Control Systems (as per customer requirement) with Touch Screen
Display / Controller data storage in Pen Drive with Direct Thermal / Dot
All the instruments can be designed with digital control systems (pid based
LCD Display 16 x 2) with optional RS-485 communication ports, cables, window
based software with inbuilt data recording.
CONTROL PANEL AND SWITCHGEARS
- µProcessor based Controller with time and temperature settable
- (Pt-100) sensor, for precise i monitoring.
- Low water level alarm and cut off for safety of heater.
- End of cycle buzzer.